CED CED7000 - Filter; Reset Function

16.
SHOT DETECTION MICROPHONE: (Continued….)
Thedigitalnumberedsettings(1to8),provideaexiblerangeofadjustmentofthemicrophonewhen
needed, depending on the shooting location and conditions. (1 = least sensitive / 8 = most sensitive).
Toadjustthesensitivity,selectMENU,thenSENSITIVITY,andthenscrollupordownusingtheDi-
rectional buttons to select the desired sensitivity level
The CED7000 shot-detecting microphone is software designed and factory preset at a mid level
range (4) that provides accurate function under most normal types of outdoor conditions. How-
ever, due to various changes in range conditions, climates, and locations, it is strongly recom-
mended to test your timer on the range it is to be used, prior to competition use, to insure it is
properly set. This will eliminate any chance of recording errors!
Always hold the timer with the front panel facing the Shooter! The microphone is located on
the upper front panel, positioned under the display screen and should have direct, clear line-
of-sight to the Shooter. In cases where a person is shooting around walls, or other objects, the
timer should be held in a manner that provides unobstructed view to the person shooting. The
Range Ofcial should be careful not to cover the microphone, or allow ejected cases to hit the
timer during recording. Ideally, the timer should be within six feet of the person ring the shot
to be recorded.
FILTER:
TheCED7000comeswithafactorypresetdefaultsoftwareltersetat8/100ofasecond.Therefore,
thetimerwillonlyrecordshotsasfastas9/100ofasecond.Thislterisdesignedtopreventunwanted
echo sounds, which cause erroneous recordings on timers. However, the CED7000 allows the user to
customadjustthesoftwarelterfrom9/100downto2/100ofasecondoranylevelinbetween.Such
adjustmentsmodifytheCED7000allowingthetimertodetectshotsasfastas33shotspersecondor
upto1,980shotsperminute.Toadjusttheltersetting,selectMENU,andthenFILTER,andusethe
directionalbuttonstoselectthedesiredamountoftimetobeltered.
BUZZER VOLUME:
The CED7000 is set with two volume levels for the buzzer beep. The normal one is a loud medium
tohighfrequencybeepinexcessof110db.SelectingtheSOFTsettingwilllowerthefrequencyand
dblevelbyaprx.50%.Thissettingisperfectforhomedryrepracticeandotheruseswherealoud
sounding beep is not desired.
RESET FUNCTION:
On the backside of the timer housing in the upper right hand corner, there is a small hole with the word
RESETunderit.Ifforanyreason,thisCED7000Timershouldfreezeup,goblankduringcharging,or
incur any other unforeseen problem, it is possible to reset the timer, which in doing, should resolve the
problem incurred. To reset the timer, use a small paperclip, straightening one end of it and inserting it
directlyintothesmallRESEThole.Continueinsertingthepaperclipuntilitcomesincontactwiththe
micro-switch.SLIGHTLYpressforward,untilthecontactswitchactivatesresettingthetimer.Iffor
any reason, the timer does not reset returning the function to normal operation, it should be returned to
CompetitiveEdgeDynamicsUSAforservicingand/orreplacementifunderwarranty.