CED CED7000T - Lcd Display

6.
BASIC FUNCTIONS: (Continued….)
Toreviewthetimeeachshotwasred,presseitherthe“REVIEW”buttonlocatedonthetopendofthe
timerortheoneonthefrontcenterconsoleandtheLCDdisplaywillreturntotherstshotandtime
recordedinthecurrentstring.Thisprocedurecanbecontinuedthroughoutallshotsrecorded.TheRE-
VIEWfunctioncanbeviewedinforwardorreverseprogressionbyusingtheUP/DOWNDirectional
keys. The memory stores ten strings with up to 39 shots per string at all times. If a string contains more
than39shots,whenstoredtomemory,thetimerwillretaintherst38shotsandthenthe39thshottime
willbetheactuallastshotredinthestring.(Example–Ifthestringcontains44shotsendingat21.23
seconds,whenthestringisstoredintomemory,shot38willappearasredandshot39willappear
as21.23).BypressingtheLEFT/RIGHTDirectionalkeys(wheninREVIEWfunction),theusercan
move from one string to another. There are always the most recent 10 strings maintained in memory.
In addition to the shot number and cumulative time, the split time (difference) between the most re-
cently recorded shot and the preceding shot time will appear on the LCD display. The CED7000 has
thecapabilitytorecordunlimitedshotsred.Thememorywillretaintherst99timesreceived,and
thenreplacethe99thtimewiththelastshottimereceivedthereafter.Whenthe“REVIEW”buttonis
pressedtherstshot/timewillalwaysappear.Youcanthenreviewthrougheachshotrecordedby
pressingoneoftheREVIEWbuttons.
Bypressingthe“START”buttonagain,thetimerautomaticallystoresinmemorythepreviousdata
received and activates the buzzer/timer accordingly. However, the CED7000 is designed to prevent
accidental loss of results. In order to re-activate the “START” button, the “REVIEW” button
must be pressed at least once. An exception to this rule is when the “Combined Comstock” mode
is in use. Refer to “Combined Comstock” section for further details. The user can also override
this function by selecting the “AUTO START – ON” feature from the Menu options
LCD DISPLAY:
The illuminated display provides review of the most recent cumulative time recorded, split-time, par-
time,rst(1st.)shotreceived,andthetotalnumberofshotsred.Italsoindicateswhichstartdelay
mode the timer is set in, the current function mode (event in use) and has a “battery symbol” indicator
whichasheswhenabatterychargeisrequired.
The display will illuminate whenever input data is received or function buttons are pressed. This is
ideal for “low light” or indoor shooting conditions.