Basic safety instructions
10
• CEDIMA® • Technical Documentation • All rights reserved according to ISO 16016 • Changes serving technical progress reserved •
ENGLISH
The operating manual uses the following symbols, designa-
tions or signs:
Protect from temperatures
around / under 0 °C!
T
Section with the content:
"Cleaning the table saw"
Clean the component!
Check the component!
DANGER
Warning of hot uids!
DANGER
Warning of pinching or crushing!
Important statements are printed in italics.
Statements concerning safety are printed bold and in
italics!
Engine oil dipstick,
check lling level!
Spirit level,
align component, machine
horizontally or vertically
Drive belt
Tensioning
Releasing
Pull-o device
Plastic hammer
Torque spanner
4
Allen key
size 4 mm
13
open-ended spanner, size 13 mm
Finger pressure test
approx. 5 mm
To Next Page
Loading...
