Cedima CF 13.3 B - Accessories Supplied; Optional Accessories

8
• CEDIMA® • Technical Documentation • All rights reserved according to ISO 16016 • Changes serving technical progress reserved •
Technical specications and accessories
CF•13.3 B / CF•13.3 B-L
ENGLISH
Equivalent total vibration value a
hv, eq
10.2 m/s²
Measurement uncertainty K m/s²
The given values can vary depending on the operating conditions (material to be cut, state of the machine, handling, user,
diamond tools in use, etc.).
When determining the daily vibration load A (8) acc. to DIN EN ISO 5349-2, the real eective time must be considered
which can be signicantly inuenced (reduced) by idle times. Idle times include times for fuelling, water supply, tool
change, machine set-up and transport, securing the location of operation/use.
Measurement uncertainty acc. to DIN EN 12096.
DANGER
Risk of injury when exceeding the daily maximum of vibration load!
2.2 Vibration acceleration values, hand-arm vibration
2.3 Accessories supplied:
1 operating manual
1 perating manual for the engine
1 water container with lashing strap
(mounted, gures 1.1 and 1.2)
1 tool set:
1 x open-ended spanner size 13 / 17,
1 x open-ended spanner size 24 (gure 2.1)
For damage resulting from using accessories that are not in accordance with CEDIMA®, we will refuse any liability.
For information about selecting the correct diamond saw blade, refer to the current price list and the current joint
cutter brochure.
For special applications please ask CEDIMA® directly.
For further accessories refer to the current CEDIMA® price list.
Provided tool set at tool holder Figure 2.1
2.4 Optional accessories
Folding blade guard - 50009001