Cedima CF 13.3 B - Adjusting the Parking Brake

19
• CEDIMA® • Technical Documentation • All rights reserved according to ISO 16016 • Changes serving technical progress reserved •
Preparation and operation
CF•13.3 B / CF•13.3 B-L
ENGLISH
4.5 Adjusting the parking brake
The parking brake must be adjusted in such a way that
the joint cutter brakes automatically as soon as the
saw blade with the cutting shaft has been lifted out
completely! For checking purposes, mount a diamond saw
blade (see section 4.6)!
CF•13.3B / CF•13.3B-L braked with parking brake Figure 4.12
17
4.6 Mounting the diamond saw blades
4.6.1 General information
DANGER
Risk of injury due to incorrect and/or incor-
rectly mounted saw blade!
ATTENTION
Exclusively use diamond saw blades!
The joint cutter is exclusively designed for use with diamond
saw blades! Other saw blades (e.g. carbide-tipped saw blades)
must not be used!
ATTENTION
Use original (spare) parts!
To attach the saw blade, only use the provided CEDIMA®
components (saw blade anges, cutting shaft nut, ...)!
DANGER
Risk of injury! It is not allowed to operate the
joint cutter without saw blade guard and cut-
ting shaft guard!
Cutting shaft, saw blade lifted, CF•13.3 B/CF•13.3 B-L braked with
parking brake Figure 4.11
1.
2.
3.