Cedima CF 13.3 B - Page 33

33
• CEDIMA® • Technical Documentation • All rights reserved according to ISO 16016 • Changes serving technical progress reserved •
Preparation and operation
CF•13.3 B / CF•13.3 B-L
ENGLISH
4.10.2 Engine stop / emergency stop
DANGER
Risk of burns! Some engine parts will be very
hot in operation and cool down slowly after
stopping the engine!
ATTENTION
Once mounted, the diamond saw blade must be able to
rotate freely!
Lift the saw blade o the surface (to be cut) and/or out of the
cut!
Unlocking the emergency stop button (press the actuated button
again so that the button jumps out) Figure 4.61
Front, switching the engine (ignition) switch to ON Figure 4.62
ON, I
CF
•
13.3 B right, engine operating elements Figure 4.63a
Gas lever
Fuel tap
Choke lever
Engine (ignition) switchStarter handle
Cutting shaft, saw blade lifted, CF
•
13.3 B braked with parking brake
Figure 4.64
1.
2.
3.
CF•13.3 B-L right, same engine operating elements Figure 4.63b
Fuel tap Engine (ignition) switchStarter handle
Gas leverChoke lever