CEFALY Dual - Charging the Battery

39
Setting Up CEFALY DUAL

• Prior to your rst CEFALY DUAL treatment session, fully charge the baery (this
typically takes 3 hours to complete).
• As shown in Fig. 5, connect the micro-USB plug to the back side of your CEFALY DUAL.
Then, connect the USB plug to the power adapter (Fig. 6) and plug the adapter into a
power source.
• While charging, the indicator light on the front of the CEFALY DUAL will ash
intermiently. The ashing will accelerate as the baery comes closer to a full charge.
Once fully charged, the indicator light on the front will remain on (Fig. 7).
  