EasyManua.ls Logo

CEFALY Dual - Problem #02 - the CEFALY DUAL Turned off During My Session

CEFALY Dual
101 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66

Possible Cause:
Your electrode is not scking well to your forehead.
Your CEFALY DUAL is not properly secured to the electrode.
The baery charge is too low.
Soluon:
Cleanse your skin again with soap and water, and pat dry. Then reposion the
electrode, aach the CEFALY DUAL and try powering it on again. To reposion the
electrode, start from the center and work your way outward toward each corner,
running your ngers several mes along the enre surface of the electrode. You
want the electrode to be at and rm against your forehead skin.
Use a mirror to make sure your CEFALY DUAL is properly posioned on the
electrode. The magnec contacts on the CEFALY DUAL must be properly secured
by the corresponding magnec contact zone on the electrode for the CEFALY DUAL
Troubleshooting

Table of Contents

Related product manuals