CEFALY Dual - Page 84

84

For a charge between 0 and 1000 ohms.
• Constant amplitude intensity predened automacally, depending on the program.
• Rectangular impulses.
• Compensated constant current prevenng any galvanic direct component. Any electrode for
which the current density is above 2mA/ cm2 requires special aenon from the operator.
Any electrode for which the current density is above 2mA/ cm2 requires special aenon from the
operator.

When the CEFALY DUAL is operated at an ambient temperature of 95°F the temperature of the
electrode will stay below 104°F.
Technical Information