EN/EU
74
Troubleshooting
Possible Cause:
• Your electrode is not scking well to your forehead.
• Your CEFALY Enhanced is not properly secured to the electrode.
• The baery charge is too low.
Soluon:
• Cleanse your skin again with soap and water, and pat dry. Then reposion the
electrode, aach the CEFALY Enhanced and try powering it on again. To reposion
the electrode, start from the center and work your way outward toward each corner,
running your ngers several mes along the enre surface of the electrode. You want
the electrode to be at and rm against your forehead skin.
• Use a mirror to make sure your CEFALY Enhanced is properly posioned on the
electrode. The magnec contacts on the CEFALY Enhanced must be properly secured