CEFALY Enhanced - Problem #06 - My Skin Is Reddened When I Remove the Electrode

EN/EU
80
Troubleshooting
Soluon:
• You may press and hold the device buon anyme during the rst 14 minutes of program
selecon to manually increase the intensity to your desired strength. When you release
the device buon, the intensity will stabilize and remain constant. Should you press and
hold the device buon again, the intensity will increase again. The maximum intensity
is reached aer pressing and holding the device buon for 30 consecuve seconds.
You should increase the intensity to a tolerable level, but you should stop before the
sensaon becomes intolerable or painful.

Possible Cause:
• The skin on the forehead may at mes become reddened where the electrode was
placed.
• This may indicate an allergy to the acrylate used in the electrode.