CEFALY Enhanced - Page 77

77
EN/EU
Troubleshooting
electrode, start from the center and work your way outward toward each corner,
running your ngers several mes along the enre surface of the electrode. You want
the electrode to be at and rm against your forehead skin.
• Wait 2-3 minutes while using CEFALY Enhanced for the intensity to increase. It’s
possible you are becoming used to the sensaon.
• Wait unl at least 4 minutes into your session, then press and hold the device buon
to manually ramp up the intensity of the session. When you release the device buon,
the intensity will stabilize at the new level and remain constant. Should you press
and hold the device buon again, the intensity will increase again. The maximum
intensity is reached aer pressing and holding the device buon for 30 consecuve
seconds. You should increase the intensity to a tolerable level, but you should stop
before the sensaon becomes intolerable or painful.
• Push the device buon once to start the ACUTE program and twice in a row
to begin the PREVENT program once the electrode and device are properly