CEFALY Enhanced - Page 84

EN/EU
84
Troubleshooting
problems turning it on, please contact CEFALY Technology for further assistance.
• Cleanse your skin again with soap and water, and pat dry. Then reposion the electrode,
aach the CEFALY Enhanced and try powering it on again. To reposion the electrode,
start from the center and work your way outward toward each corner, running your
ngers several mes along the enre surface of the electrode. You want the electrode
to be at and rm against your forehead skin.
• Use a mirror to make sure your CEFALY Enhanced is properly posioned on the
electrode. The magnec contacts on the CEFALY Enhanced must be properly secured
by the corresponding magnec contact zone on the electrode for the CEFALY Enhanced
to work properly. If the electrode is not posioned correctly and is not at against your
forehead, the contacts may not connect properly. To reposion the electrode, start
from the center and work your way outward toward each corner, running your ngers
several mes along the enre surface of the electrode. You want the electrode to be at
and rm against your forehead skin.
• If further assistance is required, contact Customer Service (see page 3).