To Next PageTo Next Page
Need help?Do you have a question about the CEL-FI RS2 Dual Band and is the answer not in the manual?
Locate the spot in your home or office with the strongest 3G signal using your phone.
Connect the Window Unit to an accessible power outlet and verify at least one signal bar is displayed.
Adjust the Window Unit's position to achieve the maximum number of signal bars for better operation.
Connect the Coverage Unit to power and confirm a green indicator light on the display after it stabilizes.
Position the Coverage Unit as far as possible from the Window Unit to maximize coverage, aiming for a display reading of 7, 8, or 9.
No lights on the Window Unit display indicate a power issue. Check connections and power sources.
Flashing green status light on Window Unit means it's selecting a channel. Wait for it to stabilize.
Solid red status light indicates a hardware error. Attempt a reset or contact support.
No signal bars and green status light means no 3G signal. Relocate Window Unit to improve reception.
Flashing signal bars indicate missing network data. Insert the operator SD card into the Window Unit.
No lights on the Coverage Unit display indicate a power issue. Check connections and power sources.
Cycling display on Coverage Unit means it's establishing a link. Wait or move away from wireless interference.
A '0' on the Coverage Unit display means it's too close to the Window Unit. Increase the distance between them.
Red 'Too Far' indicator means Coverage Unit is too distant from Window Unit. Reduce the separation.
Red status indicator on Coverage Unit signals a hardware error. Try resetting or contact support.
Improve signal by moving units or placing Coverage Unit farther away for better coverage numbers.
General| Max Gain | 100 dB |
|---|---|
| Uplink Gain | 50 dB |
| Downlink Gain | 50 dB |
| Connectors | N-type |
| Max Output Power | 20 dBm |
| Weight | 3.5 lbs |
| Frequency Bands | 700 MHz, 850 MHz, 1900 MHz, AWS (1700/2100 MHz), 2600 MHz |
| Coverage Area | Up to 15, 000 sq ft |
| Network Compatibility | 3G, 4G LTE |
| Operating Temperature | -20°C to +55°C |
| Power Supply | 100-240V AC, 50-60Hz |
