CEL-FI GO X User Manual

from
The GO X is manufactured by Cel-Fi, but supported by Waveform
and our team of Signal Specialists.
We’ve helped over 20,000 customers boost their signal since our
company was founded in 2007. We’ve installed and con gured
thousands of devices in buildings across the country, and we’re
here to help. If you have any issues at all, please don’t hesitate to
reach out.
52 Maxwell,
Irvine, CA 92618
+1 (800) 761-3041
www.waveform.com
contact@waveform.com
About Waveform
Please note: Your Cel-Fi GO X will come pre-programmed to boost Verizon signal.
You will need to change the carrier using the Wave app if you are using a different provider.
We know, reading manuals isn’t fun. But we promise it’s worth it.
We’ve helped hundreds of customers install the Cel-Fi GO X and
boost their signal. We’ve compiled everything we’ve learned in
this manual.
Give it a read before you start: it’ll save you time and help you
get the best performance out of your GO X.
Please Read This First

CEL-FI GO X Specifications

General

Model	CEL-FI GO X
Category	Extender
Max Gain	100 dB
Coverage Area	Up to 15, 000 sq ft
Connector Type	N-type
Power Source	AC Power Adapter
Compatibility	All major carriers
Frequency Bands	varies by region and model (check specific model)
Max Output Power	varies by region and model (check specific model)