EasyManua.ls Logo

CEL-FI QUATRA 4000 - User Manual

CEL-FI QUATRA 4000
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cel-Fi QUATRA 4000 Range Extender CEL-FI QUATRA ACCESSORY
Model Number:
Q40-OE
Part Number:
592NQ40NEXT1NCUS7X01
June 2020
QUATRA 4000
RANGE EXTENDER
Accessory
USER MANUAL
Compliance Contact
In the event of a regulatory compliance issue, please contact Nextivity
Inc. at www.nextivityinc.com.
Note: Certifications are regional; not all products need or have the
same certifications. Please check the specific model number to
determine exactly which certifications it has.
Patents
This product is covered by Nextivity, Inc., US patents and patents
pending. Please refer to www.cel-fi.com for details.
Support
Should you require any assistance, please contact your Cel-Fi
QUATRA reseller. If your questions cannot be answered immediately,
your reseller will forward your queries through the appropriate
channels to ensure a rapid response. If you still need assistance visit:
http://www.cel-fi.com/support.
Copyright © 2020 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity
and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or
registered trademarks listed belong to their respective owners. Designed by Nextivity Inc
in California.
manual-quatra-4000-ext_gw_20-0602
Question and Answer IconNeed help?

Do you have a question about the CEL-FI QUATRA 4000 and is the answer not in the manual?

Summary

Compliance and Support Information

Compliance Contact and Notes

Contact for regulatory compliance issues and regional certification notes. Key for product adherence.

Patents and Product Coverage

Information on US patents and pending patents covering the product. Details available on website.

Product Support and Assistance

Guidance on obtaining assistance through resellers or the official support website.

Overview of Cel-Fi QUATRA Range Extender

Product Functionality and Design

Describes the Extender as a PoE device extending distance between Network and Coverage Units.

Compatibility and Usage Limitations

Specifies sole compatibility with Cel-Fi QUATRA and limits usage to one Extender per Coverage Unit.

Installation Guide

Step 1: Locating and Mounting the Unit

Guidance on optimal placement, ventilation, and avoiding environmental hazards for the extender.

Step 2: Connecting Input and Output Cables

Instructions for connecting Cat 5e cables, power provision, and understanding LED indicators.

Technical Specifications

Detailed technical data including model, data rate, voltage, power consumption, and compliance.

General Information and Safety

Safety Precautions and Handling

Advises on indoor use, Ethernet power, and handling sharp heat sink edges.

Warranty and Limitation of Liability

Outlines the product warranty and limitations on Nextivity's liability.

Electromagnetic Compatibility (EMC)

Details EMC standards, potential interference, and corrective measures for USA and Europe.

CEL-FI QUATRA 4000 Specifications

General IconGeneral
ModelQUATRA 4000
CategoryExtender
Max Gain100 dB
Uplink Gainup to 100 dB
Downlink Gainup to 100 dB
Humidity Range5% to 95% non-condensing
Coverage AreaUp to 100, 000 sq ft
Frequency Bands700 MHz, 1900 MHz, 2100 MHz
Power Supply100-240V AC
Ethernet Ports2

Related product manuals