Safety
International Safety Symbols
This symbol, adjacent to another symbol or
terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that,
under normal use, hazardous voltages may be
present
Double insulation
SAFETY NOTES
• Do not exceed the maximum allowable input range of
any function
• Do not apply voltage to meter when resistance function
is selected.
• Set the function switch OFF when the meter is not in
use.
WARNINGS
• Set function switch to the appropriate position before
measuring.
• When measuring volts do not switch to
current/resistance modes.
• Do not measure current on a circuit whose voltage
exceeds 240V.
• When changing ranges using the selector switch always
disconnect the test leads from the circuit under test.
• Do not exceed the maximum rated input limits.
To Next Page
