Page 12 For technical questions, please call 1-888-866-5797. Item 60703
SAFETY OPERATION MAINTENANCESETUP
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY: Unplug the Power Pack, turn the Power Switch off and allow Power
Pack to cool completely before performing any inspection, maintenance, or cleaning procedures.
1. BEFORE EACH USE, inspect the general
condition of the Power Pack. Check for:
• loose hardware,
• cracked or broken parts,
• damaged electrical wiring or cable insulation, and
• any other condition that may
affect its safe operation.
2. Keep unit clean and clamps free
of dirt, debris, or grease.
3. For longer working life, protect Power
Pack from sunlight and moisture.
4. Replace fuse with same type and rating only.
5. AFTER USE, wipe external surfaces of
the Power Pack with clean cloth.
Battery Disposal
WARNING! CONTAINS SEALED LEAD BATTERY. BATTERY MUST BE RECYCLED.
The Power Pack uses a lead-acid battery that must be recycled.
1. Remove all screws from case and open. Cut wires
from battery with insulated wire clippers and remove.
2. Disposing of Power Pack must comply with standards
for hazardous waste disposal in your area. Contact
your local city government office for the nearest
hazardous waste disposal area in your community.
Call 1-800-822-8837 for battery recycling.
To Next Page
Loading...
Need help?
General
