Page 3For technical questions, please call 1-888-866-5797.Item 60703
SAFETYOPERATIONMAINTENANCE SETUP
Safety Warnings and Precautions
General Safety Warnings
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
WARNING – RISK OF EXPLOSIVE GASES.
Working in vicinity of a lead-acid battery is
dangerous. Batteries generate explosive gases
during normal battery operation. For this reason,
it is of utmost importance that you follow the
instructions each time you use the Power Pack.
To reduce risk of battery explosion, follow these
instructions and those published by battery
manufacturer and manufacturer of any equipment you
intend to use in vicinity of battery. Review cautionary
marking on these products and on engine.
Work Area Safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate Power Pack in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. The Power Pack
can create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away
while operating the Power Pack.
Distractions can cause you to lose control.
4. Store idle equipment. Always lock up tools
and keep out of reach of children.
Electrical Safety
1. Do not drop a metal tool onto battery. It
might spark or short-circuit battery or other
electrical part that may cause explosion.
2. Do not operate if Power Pack has received a
sharp blow, been dropped, or otherwise damaged
in any way; take it to a qualified technician.
3. Do not leave Power Pack unattended
while switched on. It could result
in fire and property damage.
4. Do not expose to rain or wet conditions.
Water entering the Power Pack will
increase the risk of electric shock.
5. Do not use an extension cord with this item.
6. Use of an attachment not recommended or
sold by the manufacturer may result in a risk
of fire, electric shock, or injury to persons.
7. To reduce risk of damage to electric plug
and cord, pull by plug rather than cord
when disconnecting the Adapter.
8. Do not operate with damaged cord or plug.
Replace the cord or plug immediately.
To Next Page
Loading...
Need help?
General
