Page 13For technical questions, please call 1-888-866-5797.Item 63423
SAFETYOPERATIONMAINTENANCE ASSEMBLY
Maintenance Instructions
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY: Unplug the Charger/Starter, disconnect any battery, and allow
Charger/Starter to cool completely before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
1. BEFORE EACH USE, inspect the general
condition of the Charger/Starter. Check for:
• loose hardware
• cracked or broken parts
• damaged electrical wiring or cable insulation
• any other condition that may
affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. WARNING! If the supply cord of this
Charger/Starter is damaged, it must be
replaced only by a qualified service technician.
DO NOT OPEN CHARGER/STARTER HOUSING,
NO USER-SERVICEABLE PARTS INSIDE.
To Next Page
Loading...
