How to reduce too much foam in Centek CT-1951 Washer?
If there is too much foam in your Centek Washer, use a detergent suitable for machine washing, marked «For washing machines» or «Machine wash». Also, reduce the amount of detergent used, especially if the water is soft.
How to fix low drying effect in Centek Washer?
To improve the drying effect of your Centek Washer, separate hard-to-dry and easy-to-dry items. Reduce the clothing load for drying. Avoid mixing wet and dry clothes. Ensure that the water supply valve is open during drying and that the drain pump filter is clean. Check the drain hose for kinks, twists, or blockages.
What to do if temperature is too high in Centek Washer?
Press Start/Pause to suspend the washing program. Wait for a few minutes. When the temperature in the drum drops to a safe level press Start/Pause to resume the rest of the program.
What to do if negative ion level in the drum is too high in Centek CT-1951?
Press Start/Pause to stop the washing cycle and wait for a few minutes for the anionic count to drop and the error message to disappear.
What to do if miscellaneous errors occur in Centek CT-1951?
Turn the machine off, disconnect the power cable and contact the service center for repairs without delay.
Warning about potential electric shock if the appliance or cord is damaged.
Instructions for connecting the water supply.
Guidelines for preparing and sorting clothes for washing.
Understanding care labels and checking clothes before loading.
Safety advice and how to clean the machine's exterior.
Cleaning the drum, door seal, pump filter, intake filter, and detergent tray.
General| Maximum load capacity | 6 kg |
|---|---|
| Spin speed | 1000 rpm |
| Control type | Electronic |
| Material of tank | Plastic |
| Dimensions (WxDxH) | 60x45x85 cm |
| Color | White |
| Loading type | Front |
| Special programs | Delicate |
| Protection | Child lock |
To Next Page