40
6. Items containing foam rubber (latex foam), shower caps, water proof textiles,
rubber backed articles and clothes or pillows fitted with foam rubber pads
should not be dried in the machine
7. Fabric softeners or similar products should be used as recommended in their
instructions.
8. Never try to open the door forcefully. The door will unlock shortly after the
end of a cycle.
9. Please do not close the door with excessive force. If it is found difficult
to close the door, please check if the clothes are properly inserted and
distributed.
10. Always unplug the appliance and close the water tap before cleaning and
maintenance and after each use.
11. Never pour water over the appliance for cleaning purpose. Risk of electric
shock!
12. Repairs shall only be carried out by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard. The producer will not
be responsible for damages caused by the intervention of not authorized
persons.
TRANSPORT
1. Before Transport:
– Bolts shall be reinstalled to the machine by a specialized person
– Accumulated water shall be drained out of the machine
2. This appliance is heavy. Transport with care. Never hold any protruding part
of the machine when lifting. The machine door cannot be used as a handle.
REQUIREMENTS FOR INSTALLATION, STORAGE, TRANSPORTATION (SHIPMENT), SALE
AND DISPOSAL
1. The appliance does not require any permanent installation or securing.
2. The manufacturer or consumer should store the appliance in suitable
packaging in heated facilities at a temperature of 5 °С to 40 °С and a maximum
relative humidity of 80 %. The storage facilities should not contain aggressive,
corrosion-provoking environments (acidic or alkaline vapors).
3. The following requirements should be observed to ensure proper
transportation of the appliance:
– remove all internal accessories from the appliance, if any are installed, and
pack them separately;
– ensure that the appliance is properly packed to retain its functionality and
exterior look (bulky appliances should be wrapped into plain or bubble
polyethylene film with corrugated cardboard inserts in sensitive places);
– securely fasten the appliance with straps to prevent its displacement within
the vehicle during transportation;
– transport the appliance only in an enclosed vehicle to eliminate any impact
from the outdoor environment;
– ensure that the appliance is handled with utmost care during loading and
unloading to keep the packaging undamaged.
4. The appliance requires careful handling to keep it from dust, dirt, mechanical
impact, moisture, fire, etc.
5. The appliance should be sold and purchased in compliance with the local
legislation.
6. Do not discard the appliance together with other domestic waste upon expiry
of its service life. Instead, it should be turned over for disposal to a specialized
recycling facility for electric and electronic equipment in compliance with the
federal or local legislation. By ensuring proper disposal of the appliance You
contribute to the saving of natural resources and the prevention of damage
to the environment and human health, which may occur in case of improper
handling. Detailed information about disposal facilities suitable for your
appliance located in Your area is available from the local municipal authorities
or at a domestic waste disposal company.
7. If any malfunction of the appliance should occur, please immediately contact
an authorized service center or turn the appliance over for disposal.
Should You decide to transfer the appliance to another person, please pass the
present manual over along with it.
2. APPLIANCE DESCRIPTION
1
4
2
5
7
3
6
8
9
1. Water supply tube
2. Washing agent drawer
3. Door
4. Top cover
5. Power cable
6. Control panel
7. Drum
8. Drain hose
9. Filter
3. SCOPE OF SUPPLY
– Washing machine - 1 pc.
– Plugs - 4 pcs.
– Water supply hose - 1 pc.
– User Manual - 1 pc.
– Wrench - 1 pc.
4. OPERATING THE WASHING MACHINE
INSTALLATION LOCATION
ATTENTION
– Stability is essential for preventing spontaneous displacement of the
appliance during operation.
– Ensure that the appliance is leveled out. Allowable floor gradient – 1 °.
– Ensure that the appliance is not standing on its power cable and not jamming
it.
– The minimum clearance between the appliance and the walls or adjacent
permanently fixed objects shall be 20 mm at the sides and 100 mm at the back.
To Next Page
Loading...