DATALOGGER THERMOMETER
16
(2) How can I save the graph to a file which can be used in EXCEL?
Answer: When you save a graph to a file, the default file format is "*.ghf" and you can select
*.csv to save files. CSV is an EXCEL file format.You can open it in EXCEL.
Note:
If decimal separator is comma in your country, this file format will be disabled,
because .CSV file also use comma to be data separator. for example 78,6 will become 78
and 6 in EXCEL
(3) How to uninstall TestLink SE374 ?
Answer: Uninstall TestLink SE374 by launching the Add/Remove Programs applet out of the
Control Panel, highlighting the SE374, and clicking on the Add/Remove... push button, then it
will remove the SE374 folder and files from your computer.
(4) Why loading data fail?
Answer: This might cause by the slow respond from some of the notebook PC system.
(5) How to zoom the graph?
Answer: Press the left mouse button and drag the cursor to select the new extents, then
release the mouse button.
(6) When I setup the real time sampling with a fast rate(eg. 1 sec), Some of the sampling
data might be lost.
Answer: This might be caused by slow response time of the PC interface. For better result,
the user may close the panel window.
11. Maintenance
In order to ensure the accuracy of the thermometer for a longer period of time you should calibrate
it once a year.
Clean the device and the window of the display with a clean, lint-free, antistatic and dry cleaning
cloth.
Do no use cleaning agents that contain carbon or benzenes, alcohol or anything similar to clean
the product since these substances damage the surface of the measuring instrument. Moreover, these
fumes are hazardous to health and explosive. Do not use tools with sharp edges, screwdrivers, metal
brushes or anything similar to clean the device.
To Next Page
Loading...
