Pg. 28 80231-EN-V2025-02-14
2. Activate your Bluetooth headphones and put them into pairing mode. Follow the instructions provided
by the manufacturer to pair or connect it.
3. Once the Bluetooth headphones are found, the console will list it as an available device.
4. Tap on Connect. The headphones will be connected, muting the speakers on the treadmill.
To disconnect your device, tap on Disconnect from the list of connected devices.
Your machine is able to connect across a Bluetooth
®
connection to a fitness app (such as Zwift) running
on your device. The app will reflect the current workout, but the speed and incline of the workout will be
controlled by the treadmill.
1. Confirm that Bluetooth is active on your device.
2. Open the desired fitness app on your device, and log in to your account.
3. Next, connect the treadmill to the app. On the Zwift app, select the Run tab and tap on “Run Speed”
from the Paired Devices screen.
4. The app will search for available devices, and will provide an available list.
5. Tap on “Centr-T3-XXXXXX” to select it.
6. The app will show that it is connected to the treadmill.
7. Tap OK.
8. Then select a workout and tap Start when ready to workout.
9. Once the workout on the app begins, push Start on the treadmill to begin a Quick Start workout. The app
will capture your workout from the treadmill.
If the app does not follow along with the workout, the connection to the treadmill may need to be
reconnected. For the Zwift app, tap the lower left side of the screen on your device. Then tap on Menu, and
the available options are displayed. Tap on Pair found on the right side of the display. The Paired Devices
screen of the app is displayed. Repeat Steps 3-7 to reconnect the treadmill to the app.
To Next Page