To Next PageTo Next Page
Need help?Do you have a question about the Central Boiler Fire Star and is the answer not in the manual?
Entering Demand Mode when water temp drops below setpoint, and primary air actuator behavior.
Describes secondary air actuator operation when combustion temp reaches 550°F.
Steps to enter the controller's setup mode for customization of operating parameters.
How to change adjustable settings within Setup Mode using menu numbers and arrow buttons.
Procedure to reset all controller settings to factory defaults using a specific button combination.
Menu item to enable or disable the Wi-Fi feature without losing previously saved network settings.
Steps to enable and configure the Wi-Fi connection for the first time, including network selection.
Allows downloading and installing controller software updates via the internet for improved functionality.
Alarm indicating the Reaction Chamber temperature is too low for an extended period.
Alarm for water temperature exceeding 200°F, recovering below 195°F.
Alarm for external sensor detecting water temp above 200°F, disconnecting power to components.
Alarm indicating a low water level in the system, requiring immediate attention.
Step-by-step guide to connect the FireStar controller to a Wi-Fi network.
General| Brand | Central Boiler |
|---|---|
| Model | Fire Star |
| Category | Controller |
| Language | English |
