Central Machinery 38119 User Manual

5-SPEED DRILL PRESS
Model 38119
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
1998 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Dia-
grams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may
differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10e

Central Machinery 38119 Specifications

General

Motor	1/2 HP
Chuck Size	1/2 inch
Voltage	120 V
Drill Chuck Capacity	1/2 inch
Table Tilt	45°
Amperage	5.5 A

Summary

Important Safety Information

Safety Symbols and Hazard Definitions

Explains safety symbols like DANGER, WARNING, CAUTION, and NOTICE.

General Tool Safety Warnings

Safe Tool Operation Practices

Key guidelines for safe operation including guards, work area, and apparel.

Drill Press Safety Warnings

Specific Safety Precautions

Essential safety rules for operating the drill press.

Vibration Safety

Reducing Vibration-Related Injury

Measures to minimize physical injury from tool vibration exposure.

Grounding Instructions

Three-Prong Plug Grounding

Proper grounding procedures for electrical safety with three-prong plugs.

Specifications

Assembly

Table and Head Mounting

Installing Chuck and Handles

Settings and Adjustments

Adjusting the Table Position

Setting Required Angle

Setting Drilling Depth

Changing Spindle Speed

Steps to alter spindle speed via belt repositioning.

Operation

Cutting Speeds

Maintenance

Routine Care

Troubleshooting

Common problems and solutions for drill press operation.