Central Machinery 47158 - User Manual

MICRO MILL/DRILL MACHINE
Model 47158
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
©
by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
®

Summary

SPECIFICATIONS TABLE

SAVE THIS MANUAL

GENERAL SAFETY WARNINGS AND PRECAUTIONS

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

UNPACKING

CLEANING, ASSEMBLY, AND MOUNTING INSTRUCTIONS

To Clean The Micro Mill;Drill Machine

Steps to remove protective coating and lubricate moving parts before initial use.

To Assemble The Micro Mill;Drill Machine

Instructions for attaching the hand wheels to the machine's shafts.

To Mount The Micro Mill;Drill Machine On A Workbench

Procedure for securely attaching the machine to a workbench surface.

MACHINE ADJUSTMENT INSTRUCTIONS

To Use The Adjustment Controls

Explains how to operate height, chuck, feed, and table adjustment controls.

OPERATING INSTRUCTIONS

INSPECTION, MAINTENANCE, AND CLEANING

PARTS LIST

ASSEMBLY DIAGRAM

SCHEMATIC DIAGRAM

WIRING DIAGRAM

Central Machinery 47158 Specifications

General

Model	47158
Swing	8 inches
Spindle Travel	2 inches
Drill Capacity	1/2 inch
Table Tilt	45 degrees left and right
Motor Voltage	120V