Central Pneumatic 43760 - Unpacking

For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
SKU 43760 Page 2
Unpacking
When unpacking, check to make sure the product is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible.
Contents
Unpacking ................................................................................................... 2
Specifications ............................................................................................. 3
Safety Warnings and Precautions............................................................. 3
Air Connection............................................................................................ 6
Control Layout ............................................................................................ 6
A Comparison: Conventional versus HVLP Spray Guns ........................ 7
Preparation ................................................................................................. 7
Fan Direction and Pattern Adjustment ..................................................... 8
Techniques................................................................................................. 10
Maintenance............................................................................................... 11
Parts List .................................................................................................... 12
Assembly Diagram .................................................................................... 13
Troubleshooting ........................................................................................ 14
REV 12/05
IMPORTANT: Before using for the first time, the spray gun must be cleaned
using a solvent based thinner. If not removed, the red oil used by the
manufacturer for testing and corrosion protection may contaminate paint.
IMPORTANT: The Spray Gun must be cleaned immediately after use.
Improper cleaning is a common reason for the Spray Gun not to work.