Central Pneumatic 93786 User Manual

5 HP
Air Compressor Pump
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
93786
Due to continuing improvements, actual product may differ slightly from the product described herein.

Central Pneumatic 93786 Specifications

General

Brand	Central Pneumatic
Model	93786
Category	Air Compressor
Language	English

Summary

Safety Warnings and Precautions

Use the right tool for the job

Use eye and ear protection

Mandates wearing ANSI-approved safety goggles, face shields, and dust masks.

Disconnect power

Remove adjusting keys and wrenches

Crucial step to remove all tools before starting operation.

Avoid unintentional starting

Check for damaged parts

Pre-use inspection for proper function, alignment, and damaged components.

Use proper size and type extension cord

Air Compressor Pump Safety Precautions

Use proper size motor and motor pulley

Specifies motor HP and pulley RPM requirements for the pump.

Install motor, pulley belt and pulley belt cover securely

Emphasizes secure installation of motor, belts, and covers for safety.

Be sure all equipment is rated to the appropriate capacity

Use Safety Guard for Pulleys

Mandates covering all moving belt and pulley elements for safety.

Properly fill Air Compressor Pump oil reservoir before operating

Instructions for filling the oil reservoir correctly to prevent damage.

Installation

Aligning the pump and motor

Instructions for precise alignment of the pump, motor, and belt wheel.

Mounting the pump securely

Motor mounting and belt tensioning

Guidance on securely mounting the motor and adjusting belt tension for optimal performance.

Connecting plumbing and safety guard

Operation

Starting the compressor

Cooling and shutdown procedures

Maintenance

Pre-operation oil level check

Verify the oil level through the window before each use.

V-belt and air filter checks

Oil change procedure