To Next PageTo Next Page
Need help?Do you have a question about the Central Pneumatic 90234 and is the answer not in the manual?
General| Brand | Central Pneumatic |
|---|---|
| Model | 90234 |
| Category | Air Compressor |
| Language | English |
Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
Ensure proper grounding, avoid wet conditions, and handle power cords with care.
Stay alert, use common sense, and avoid operation under impairment.
Dress properly, avoid accidental starts, maintain balance, and use safety equipment.
Use correct tools, ensure switch functionality, disconnect power, and maintain tools.
Tools with three prongs require a properly grounded outlet for safety.
Double insulated tools do not require grounding and use two-prong plugs.
Explanation of symbols like Double Insulated, CSA, UL, Volts, Amperes, RPM.
Maintain safe environment, labels, use eye/hearing protection.
Keep children away, avoid alcohol/drugs, use correct oil.
Check oil level, drain tank daily, avoid injury, dress properly, and maintain care.
Use right tool, avoid modification, use identical replacement parts.
Check all parts against the parts list upon unpacking. Contact for missing/broken parts.
Always fill the Air Compressor with premium quality, 30-weight, non-detergent oil.
Check oil level via window, add oil through plug hole if low, do not overfill.
Connect air hose to closed Air Outlet Valve; use filter/oiler if needed.
Close drain valve, ensure switch is OFF, plug in, then turn switch ON.
Compressor builds pressure (85-115 PSI) and cycles automatically; do not adjust pressure switch.
Turn Pressure Regulator to adjust air pressure to the tool (90-115 PSI).
Turn off switch, unplug, release tool pressure, drain tank, and manage overload.
Unplug before inspection. Check for damage, binding, or wiring issues.
Check oil level and purge tank daily to prevent corrosion.
Store the Air Compressor in a clean, dry location.
List of part numbers, descriptions, and quantities for compressor components.
Visual representation of part placement and connections for compressor assembly.
