SKU 94734 For technical questions, please call 1-800-444-3353. Page 10
Note: The Air Compressor is equipped with an external overload device. Should the Air
Compressor experience a short or excessive load, the overload device will trip and
the machine will automatically shut down. If this happens, turn Off the Power Switch
(A5), wait 10 minutes and check for any obvious problems. Reset the Overload
Protection Button (41) then, turn On the Power Switch to restart the Air Compressor.
See Drawing “A” below.
ASSEMBLY DRAWING “A”
A3
A5
A2
A11
A13
A1
A6
A14
A12
A9
A7 (under the tank)
on
(41) Overload
Protection
Button
REV 07b; 10d
A10
A14
A10
To Next Page