CENTROPIX BUBBLE2 - Instructions for Use

By purchasing the BUBBLE
2
, you get a modern
device that contains a lithium-ion battery. The
service life of the battery depends mainly on the
proper care.
It is important not to expose the BUBBLE
2
to
excessive heat sources or store it near or on hot
surfaces. Extreme temperature uctuations can
occur, especially in a car. For this reason, it is
recommended not to store the BUBBLE
2
in the
vehicle.
Important notes on storage /
Storage / Non-use
A device with an internal battery has a limited
storage time. This safe storage time depends on
various factors, including the ambient temperature,
the current state of the device and the charge level
of the battery.
Mended storage conditions
- Storage temperature: 10° - 30° C (50° - 86° F)
(Avoid high temperatures!)
If a device lies unused or without charging for a
longer period of time (approx. 3 months), this can
severely damage or even destroy the battery. The
battery`s performance could then be severely impaired,
or the device may only be usable to a limited extent.
It is advisable to charge the battery regularly and
avoid longer periods of non-use.
Usage
With normal use and a full, new battery, the device
should work for 3 to 5 days (see operating times
table) without recharging (indicated by an LED
that ashes at regular intervals), depending on the
frequency. If the device is not recharged in time, it
switches o automatically.
Donotleavethe BUBBLE
2
inanemptystatefor
morethanapprox.3monthswithoutrecharging,
otherwisethereisariskofbatterydamage.Itis
recommendedtochargethe BUBBLE
2
regularly
(e.g.weekly)andnottoconnectitpermanently
tothecharger.Althoughthisisbasicallyharmless ,
it can accelerate the aging process of the
battery.
Instructions for use
05