The POLOphone system is supplied as separate components:
!
Component 1-Entry Panel (with one or two call buttons) consisting of:
!
Component 2 -Handset consisting of:
!
Component 3-Optional
SYSTEM COMPONENTS
Polophone Intercom - Page 5
1 X 14V DC Power supply/mains adapter(2 pin)
(Alternatively use auxiliary 12V supply from gate motor)
2 X Rawlplugs
2 X Mounting Screws
1 X Cover Retaining Screw
1 X Mounting Screw sealing washer
2 X Call button labels
rM
X
2 X Rawlplugs
2 X Mounting Screws
1 X Cover Retaining Screw
1 X Telephone Cord
1 X Cable Tie
A
B