cprosolutions. 1 855 535 0558
12
MACHINE MAINTENANCE
The Original & Silver Bullet are precision machines. It is essential that it is operated and maintained with
this in mind. The machine has been adjusted and tested by the manufacturer prior to shipping to ensure
optimal performance. However, it is important to inspect the machine at initial start-up and after each
use to ensure that no damage or plant material build-up has occurred and that the blades spin freely.
In addition, it is highly recommended to clean the machine at the end of every use. This ensures that the
blades are kept lubricated and that resin does not build-up and affect performance. This is especially
important if the machine has been stored for an extended period of time.
Due to the Quantanium coating on the tumbler, The Original & Silver Bullet do not require any
lubricants or sprays. The application of which will only damage or alter the final product and will not
assist with the cutting process. In fact, it may hinder it. Cold water is recommended to spray on blades
during harvest.
We recommend taking one or two links out of the belt after 50 hours of use. If you notice the tumbler
rotation slowing down, then this is a sign of the belt becoming loose. Once you notice this happening,
please remove a link or two until it is tight again.
To Next Page
Loading...