12
model no. 399-0992-0 | contact us 1-844-428-7277
ON
Turn the main switch to ON (I)
position, and the pressure washer is
ready to operate.
Depress the trigger until there is a
steady stream of water.
ASSEMBLY AND OPERATING INSTRUCTIONS
10
11
CAUTION
Drain unit after each use (for storage): remove water connection, turn ON the
machine for a few seconds and press gun trigger to bleed remaining water in the
pump. Turn OFF immediately.
VE17-Certified-Pressure-Washer-EN.indd 12 2019-01-18 10:17 AM
To Next Page
Loading...
