5
IMPORTANT PRECAUTIONS — READ FIRST
IMPORTANT — GROUNDING
In a double-insulation product, two systems of insulation are provided instead of grounding. No grounding is provided on a
double-insulated product, nor should a means for grounding be added to the product. Servicing a double-insulated product
requires extreme care and knowledge of the system, and should be done only by qualified service personnel.
Replacement parts of a double-insulated product must be identical to the parts they replace.
A double-insulated product is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED”. The symbol “
” may
also be marked on the product.
• This system is capable of producing
high pressure as rated in the Technical
Specifications. To avoid rupture and
injury, do not operate this machine with
components rated less than the unit
itself (including but not limited to spray
guns, hose and hose connections).
• Before servicing, cleaning or removal
of any parts, shut OFF power and
relieve pressure.
• Do not spray electrical apparatus
and wiring.
• If connection is made to a potable water
system, the system must be protected
against backflow.
WARNINGS
• Do not direct discharge stream at
persons.
• High-pressure jet can be dangerous
if misused.
• The jet must not be directed at persons,
animals, electrical devices, or the
unit itself.
WARNINGS
• Do not spray flammable liquids.
• Do not use acids or solvents in
this product.
• These products can cause physical
injuries to the operator and irreversible
damage to the machine.
CAUTION — Gun Kicks Back
• Hold with both hands.
• The trigger safety lock prevents the
trigger from being engaged accidentally.
• The safety feature DOES NOT lock the
trigger in the ON position.
WARNING — Risk
of Electric Shock
• Inspect cord before using. Do not use if
cord is damaged.
• Keep all connections dry and o
the ground.
• Do not touch the plug with wet hands.
• Do not use extension cords longer than
50’ (15.2 m). Only use 12 or 14 AWG rated
extension cords.
VE17-Certified-Pressure-Washer-EN.indd 5 2019-01-18 10:17 AM
®
To Next Page
Loading...