15
TAKING A BREAK
Engage trigger safety lock.
Unplug the power cord from the outlet.
Turn unit to OFF (O) position.
If taking a break of five minutes or more:
ASSEMBLY AND OPERATING INSTRUCTIONS
1
2
3
CAUTION
Failure to clean properly will cause the detergent injection system to become clogged
and inoperable.
CAUTION
Never use:
• Bleach, chlorine products or other corrosive chemicals;
• Liquids containing solvents (e.g., paint thinners, gasoline, oils);
• Tri-sodium phosphate products;
• Ammonia products; or
• Acid-based products.
These chemicals will harm the unit and will damage the surface being cleaned.
VE17-Certified-Pressure-Washer-EN.indd 15 2019-01-18 10:17 AM
®
To Next Page
Loading...
