15
4:7.6 Water Separator Oil Filter
A Water Separator For Gas Oil is recommended (part
No. BS03052).
4:7.7 Flexible Oil Pipes
The Flexible Oil Pipe is fitted inside the Heater cas-
ing and is of adequate length to enable the Burner to
be removed without disconnecting.
4:8 OIL BURNER
The Burner manufacturers’ Technical Leaflet is sup-
plied with this manual and provides supplementary
information not included in this manual.
4:8.1 Burner Pump for Two Pipe System
For two pipe oil systems the Burner Oil Pump has to
be fitted with the Bypass Screw supplied. Heaters
are despatched with the Bypass Screw in a labelled
envelope attached to the Burner. This socket screw
9-04-02
To Next Page
Loading...
