To Next PageTo Next Page
Need help?Do you have a question about the Certikin MB50S and is the answer not in the manual?
Key physical and operational parameters of the heater models.
Detailed performance data including heat input, efficiency, and gas rates.
Steps to prepare the heater before initial operation for safety.
Simplified steps for immediate operation of the heater.
Explanation of the heater's control panel buttons, knobs, and display.
Explanation of LED indicators for heating demand and operational status.
Description of error codes (OH2, GAS, HI) and their resolution.
Functionality and importance of the water pressure switch for safety.
Important cautions regarding safe water temperatures for pool and spa use.
Overview of the Certikin Genie pool heaters, their features, and models.
Recommended chemical levels for pool water to ensure heater longevity.
Legal requirements for gas appliance installation and compliance.
Guidelines for selecting an appropriate and safe installation location.
Guidelines for the correct installation of the condensate drainage system.
Recommendations for integrating the heater with pool pump and pipework.
Steps to protect the heater from freezing during cold periods.
Details on the correct electrical connection and supply for the heater.
Specifies necessary space around the heater for safe installation and maintenance.
Step-by-step instructions for the physical installation of the heater.
Details on various flue kits, bends, and their equivalent lengths.
Instructions for correctly fitting the horizontal wall terminal.
Conditions required for the heater to operate correctly.
Instructions on how to enter User Setup and Service modes for diagnostics.
Comprehensive guide to understanding fault codes displayed on the unit.
Guidelines for regular maintenance checks and intervals for efficient operation.
Procedures for cleaning and inspecting the burner and combustion chamber.
Steps for checking the condition and gap of the spark and sense electrode.
Inspection of pipework for leaks and seals, plus gas rate and combustion checks.
General procedures for replacing various internal components.
List of available spare parts with manufacturer and supplier part numbers.
Visual guide to locating key electrical components within the heater.
General| Voltage | 230V |
|---|---|
| Phase | 1 |
| Frequency | 50Hz |
| Thermostat Range | 40°C |
| Protection Rating | IPX4 |
