To Next PageTo Next Page
Need help?Do you have a question about the Certikin MB35S and is the answer not in the manual?
Essential safety warnings and emergency procedures for gas leaks and safe appliance operation.
Description and function of the main controls and indicators on the heater's front panel.
Explains the meaning of various LED indicators and on-screen messages for heater status.
Guidelines for safe water temperatures, cleaning, periodic servicing, and winterisation procedures.
Details on suitable installation locations, gas supply requirements, and regulatory compliance.
Warning regarding external control device connections and potential warranty or regulatory implications.
Instructions for converting the appliance to different gas types and guidelines for flue system installation.
Information on air supply requirements and considerations for installing the heater outdoors.
Diagram and minimum distance requirements for flue terminal installation to ensure safe operation.
Details on the condensate trap, drain outlet size, and connection methods for condensate disposal.
Guidance on plumbing connections, pump recommendations, and procedures for winterisation and frost protection.
Specifications for the electrical supply, including voltage, frequency, phase, and fuse rating.
Recommended clearances for installation and servicing, and a step-by-step installation guide.
Information on different flue system types, including concentric, roof, and wall terminals.
Detailed dimensions of the heater and a diagram showing pipe connection points.
Specific dimensions and guidance for installing a horizontal wall flue terminal.
Diagrams and dimensions for outdoor and vertical roof flue terminal installations.
Visual examples of different flue configurations and a list of available flue kit part codes.
Information on flue terminal guards and recommendations for installing a roof terminal.
Guidance on water plumbing, required flow rates, and the function and adjustment of the pressure switch.
Step-by-step instructions for converting the heater between Natural Gas and LPG.
Details on gas connection requirements, pressure, and gas rate specifications.
Instructions for routing and connecting the condensate drain pipe.
Requirements for electrical wiring, isolation, and control unit connections according to regulations.
Illustrations of different methods for disposing of condensate, such as soakaways and stack attachments.
Description and illustration of the condensate syphon, including its cleaning and winterisation.
Detailed steps for commissioning the heater, including de-aeration and safety checks.
Explanation of how to operate the heater, its key features, and how to interpret status displays.
Procedure for accessing and modifying user settings, such as display units and maximum temperature.
Information on connecting multiple heaters for increased output and a list of available kit part codes.
Step-by-step instructions for installing the multiple heater kit, including PCB setup and interconnections.
Instructions for installing the wall mounting kit, including bracket attachment and heater hanging.
Diagram illustrating the heater's internal electrical connections and component wiring.
Essential safety checks before electrical work and the heater's operational sequence.
Procedures for entering and using User Setup Mode and the special Service Mode for diagnostics.
Details on activating and using the test mode to display sensor temperatures with higher resolution.
Explanation of fault codes indicated by LEDs and display messages, and their probable causes.
Recommended checks and tasks for regular servicing to ensure efficient operation.
Instructions for accessing and cleaning key internal components like the burner, heat exchanger, and pipework.
General guidance on replacing internal components, noting that most controls are not repairable.
Identification of electrical components accessible after removing the front panel and chassis cover.
Details on replacing specific electrical components such as fuses, transformers, thermostats, and relays.
Instructions for replacing various heat exchanger-related components, sensors, and the gas valve.
A comprehensive list of spare parts with manufacturer and supplier part numbers.
Visual identification of key electrical components within the heater's control panel.
Section for recording commissioning details such as installer number, date, working pressure, and CO2 levels.
Logbook for recording periodic service dates, cleaning, pressure checks, and combustion analysis.
General| Brand | Certikin |
|---|---|
| Model | MB35S |
| Category | Swimming Pool Heater |
| Language | English |
