Certikin MB35C User Manual

WARNING: If the information in these instructions are not followed exactly, a fire or explosion
may result causing property damage, personal injury or death.
- Do not store or use gasoline or other flammable vapours and liquids in the vicinity
of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbour's phone. Follow the gas
supplier's instructions.
- Installation and service must be performed by a Corgi registered installer.
Operating, Installation and
Servicing Instructions for
Condensing
Pool & Spa Heaters
M1996
Models:
MB35C
MB50C
0087
Genie
Serial No:
Factory set for Natural Gas.
Can be Converted to Propane
with parts provided.

Certikin MB35C Specifications

General

Model	MB35C
Category	Swimming Pool Heater
Heating Capacity	35 kW
Fuel Type	Electric
Water Flow Rate	6 m³/h
IP Rating	IPX5

Summary

Technical Data and Specifications

Performance Specifications

Gas category, heat input, efficiency, gas rate, and combustion settings for different models.

User Operating Instructions and Safety

Safety Warnings and Precautions

Crucial warnings regarding fire, explosion, property damage, injury, and death if instructions are not followed.

Control Panel Overview and Operation

Health and Safety Guidelines for Pool Use

Recommendations and warnings for safe use of hot tubs and pools, especially for vulnerable individuals.

Introduction to Certikin Condensing Heaters

Heater Overview, Gas Safety, and Location

Gas Supply, Conversion, and Flueing

Information on gas supply requirements, conversion procedures, and flue system configurations.

Heater Installation Procedures

Installation Steps and Terminal Types

Flue System Configuration and Parts

Plumbing, Gas Connections, and Conversion

Condensate Connection and Disposal

Electrical Connection Requirements

Detailed instructions for safe electrical connections, including earthing and isolation.

Troubleshooting and Servicing

Fault Finding and Error Code Interpretation

Detailed list of fault codes shown on the front panel and PCB, their meaning, and required actions.

Routine Service Checks and Component Replacement