Need help?Do you have a question about the Certikin Genie S and is the answer not in the manual?
General| Brand | Certikin |
|---|---|
| Model | Genie S |
| Category | Swimming Pool Heater |
| Language | English |
Explains heater operation, safety controls, and lockouts.
Details how to enter and configure User Setup Mode for settings.
Describes accessing and using Service Mode for settings and fault investigation.
Explains the specialized temperature display mode for diagnostics.
Details how to enter and use User Setup Mode for configuration.
Describes accessing and using Service Mode for settings and fault investigation.
Explains the specialized temperature display mode for diagnostics.
Details the procedure to enter and operate Engineering Mode.
Explains parameters like boilertype, display type, proportional band, and DeltaT.
Details the procedure to enter and operate Engineering Mode.
Explains parameters like boilertype, display type, proportional band, and DeltaT.
Explains fault conditions indicated by PCB LEDs and front panel display.
Identifies key components in the electrical assembly via labels.
Lists items, manufacturer part numbers, and supplier part numbers.
Lists external, internal lock-out, and blocking condition error codes.
Details specific external lock-out conditions and their causes.
Step-by-step guide for diagnosing electrical issues.
Guides troubleshooting based on water temperature and sensor resistance.
Guides on diagnosing why the heater fails to ignite or run.
Table showing sensor resistance values at different temperatures.
Troubleshooting steps for the IID module and associated wiring.
Explains the meaning of various combinations of control panel lights and troubleshooting steps.
Identifies components in the electrical assembly via numbered labels.
Lists items, descriptions, and part numbers for various models.
Lists electrical assembly components and their part numbers.
Lists available flue kits and their corresponding part numbers.
Lists items, descriptions, and part numbers for various models.
Details horizontal flue dimensions, vertical flue calculations, and gas oil conversion components.
Lists nozzle sizes and capacities for Kerosine and Gas Oil fuels at various pressures.
Defines networking, master/slave roles, adapter installation, and setup procedures.
Explains slave availability, display indicators, and operational behaviour in networked systems.
Provides typical, min, and max resistance and current values for multimeter testing of components.
To Next Page
