CESAB S214 - 19.2.2 Marking according to the manufacturer’s standards; Abbreviations; Marking examples

© Cesab 19 – 2 T Code(s): 841, 842, 843
Repair manual: Instructions for disposal Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
19.2.2 Marking according to the manufacturer’s standards
Standards: 58-02-001, 58-02-003 and 58-02-004.
A few examples of markings are given here. For more information, please
refer to the standards above.
The product material and trade name of each item are indicated between
arrows. Example: >PP<.
Abbreviations
• ABS: acrylonitrile/butadiene/styrene
• HDPE: High Density Polyethylene
• LDPE: Low Density Polyethylene
• PA: Polyamide
• PA6: Amide resin 6
• PA66: Amide resin 66
• PBT: Polybutylene terephtalate
• PC: Polycarbonate
• PET: Polyethylene terephtalate
• PMMA: Plexiglas
• POM: Polyoxymethylene, Polyformaldehyde
• PP: Polypropylene
• PUR: Polyurethane
Marking examples
Products made from a single substance
ABS (acrylonitrile/butadiene/polystyrene):
>ABS<
Polyurethane:
>PUR<
Plastic compounds
A compound based on acrylonitrile/butadiene/polystyrene and carbonate
plastic:
>ABS+PC<
Filled or reinforced materials
Polypropylene with 30% mineral powder:
>PP-MD30<
https://www.forkliftpdfmanuals.com/