Cessna 172S Skyhawk - To Transmit an Emergency Signal; To Transmit a Signal Representing Loss of All Communications; To Program Flight Identification Code

CESSNA
MODEL 172S
SECTION 9 - SUPPLEMENTS
SUPPLEMENT
16
SECTION 2
LIMITATIONS
There is no change to the airplane limitations when this avionic
equipment is
installed.
SECTION 3
EMERGENCY PROCEDURES
TO TRANSMIT AN EMERGENCY SIGNAL
1. Mode Selector Switch - ALT.
2. Transponder Code Selector Knobs - SELECT 7700
operating code.
TO TRANSMIT A SIGNAL REPRESENTING LOSS OF ALL
COMMUNICATIONS (WHEN IN A CONTROLLED ENVIRONMENT)
1 . Mode Selector Switch - AL T.
2. Transponder Code Selector Knobs - SELECT 7600
operating code.
TO PROGRAM FLIGHT IDENTIFICATION CODE
1 . Mode Selector Switch - AL T
2. Transponder Code Selector Knobs - SET assigned
SQUAWK code.
DURING TAXI
SECTION 4
NORMAL PROCEDURES
1. Mode Selector Switch - GND.
FAA
APPROVED
Original
(Continued Next Page)
U.S. S16-9