Cessna T303 - 5-37. TAILCONE.; A. Flight Controls (Chapter 27).

CESSNA
MODEL
T303 MAINTENANCE
MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL
T303
OPERATION NO. 3
MECH
INSP REMARKS
(11 ) Elevator
Trim
Tab -
Inspect trim
tab skins
for cracks
and loose
rivets. Check trim tab
hinge for security and
evidence of
damage.
Check tab
free play and
travel. Check
hinge pin
for
security.
(12) Elevator Trim
Tab Actuator - Inspect actuator
attach bolts.
Inspect
pushrod bolts for proper
safety of nuts with cotter
pins.
(13) Elevator
Trim Tab Actuator
- Service.
B.
Stabilizers
(Chapter 55).
(1) Horizontal
Stabilizer - Inspect skin for
cracks, loose or failed
fasteners
and
evidence of
structural damage.
Inspect
hinge
bracketry
for cracks
and loose
and/or working
fasteners.
(2) Vertical Stabilizer -
Inspect skin for cracks, loose
or failed
fasteners
and evidence of structural
damage. Inspect
hinge
bracketry
for cracks
and loose and/or
working
fasteners.
5-38. POWERPLANT.
A.
Propellers
(Chapter 61).
* (1) Propeller Spinner
- Clean, check for cracks,
fractures and
security
of installation.
B. Powerplant
(Chapter
71).
(1)
Engine Compartment
- Check
for oil and
fuel leaks, general
condition.
(2) Engine Mounts
and Ground Straps - Check
condition, security
and
alignment.
(3) Engine Wire
Bundle - Check condition
and security.
* (4) Engine Compartment Hoses, Fuel (Check fuel lines under
pressure) Oil and
Vacuum - Check for deterioration,
leaks,
discoloration,
bleaching
and stiffness.
(5) Cowl
Flap Hinge
- Secure.
(6) Cowl Flap
Control - Check freedom
of movement.
* (7) Induction Air Filter - Service.
(8) Induction
System -
Check condition
and security
of ducting.
(9)
Engine
Baffles and
Seals
- Check
condition
and security.
*50-Hour
Requirement,
Refer
to Paragraph
5-22,
B.
Page
2 of
6