Cessna T303 - B. Stabilizers (Chapter 55).; 5-28. POWERPLANT.; A. Fire Protection (Chapter 26).; B. Propellers (Chapter 61).

CESSNA
MODEL
T303
MAINTENANCE
MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL
T303
OPERATION
NO.
1
MECH INSP
REMARKS
(10)
Elevator
Bellcrank
-
Inspect
bellcrank,
pushrods,
stop
bolts,
jam
nuts
and
brackets
for
corrosion
evidence
of
damage,
failed
fasteners
and proper
safetying.
(11)
Elevator
and Elevator
Trim
Tab Cables
- Check
condi-
tion,
routing,
tension,
turnbuckle
safetying;
cables
in
pulleys
and
not
rubbing
on
structure.
(12)
Elevator
Trim Tab
- Inspect
trim
tab skins
for loose
rivets.
Check
trim
tab
hinge
for
security
and
evidence
of
damage.
Check
tab
free
play
and
travel.
Check
hinge
pin
for
security.
(13)
Elevator
Trim
Tab Actuator
-
Inspect
actuator
attach
bolts.
Inspect
pushrod
bolts
for
proper
safety
of
nuts
with
cotter
pins.
(14)
Elevator
Trim
Tab
Actuator
-
Service.
B. Stabilizers
(Chapter
55).
(1) Horizontal
Stabilizer
- Inspect
skin for
cracks,
loose or
failed
fasteners
and
evidence
of structural
damage.
Inspect
hinge
bracketry
for cracks
and
loose
and/or working
fasteners.
(2) Vertical Stabilizer
- Inspect skin for cracks
loose or failed
fasteners
and
evidence of
structural damage.
Inspect
hinge
bracketry
for cracks
and loose and/or
working
fasteners.
5-28.
POWERPLANT.
A.
Fire Protection
(Chapter
26).
(1) Detection Sensor - Inspect for security and evidence of
damage.
B. Propellers (Chapter 61).
* (1) Propeller Spinner - Clean, check for cracks, fractures and
security of installation.
(2)
Blades - Check
for nicks and cracks.
(3)
Propeller Hub - Check
general condition.
(4)
Propeller Governor - Check
operation, oil leaks, condition
and
security.
(5)
Spinner Bulkhead
- Check
for cracks
and security.
(6) Propeller - Check for oil leaks.
(7)
Propeller
Mounting
- Check
for
security
and blade
track.
*50-Hour
Requirement,
Refer
to Paragraph
5-22,
B.
Page
6
of 9