Cessna T303 - F. Ice and Rain Protection (Chapter 30).; G. Navigation and Pitot;Static (Chapter 34).; H. Lights (Chapter 33).; I. Doors (Chapter 52).

CESSNA MODEL
T303 MAINTENANCE
MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL
T303
OPERATION
NO.
1
MECH
INSP
REMARKS
* (2) Nose Gear Shock Strut - Check for evidence of leakage, proper
extension; check strut barrel for corrosion, pitting and cleanli-
ness.
(3) Nose Gear Shock Strut - Service.
* (4) Nose
Gear Torque Links - Inspect
for wear and condition.
*(5) Nose
Gear Torque Links
- Lubricate.
* (6) Nose
Gear Trunnion and Pivot
Bearings - Lubricate.
(7) Nose Gear Fork - Inspect for cracks, general condition and
security
of attachment.
* (8) Shimmy Dampener - Check for security of installation, attach
points
for wear and
condition, lubricate.
(9) Shimmy Dampener - Service.
(10) Nose Gear Door Actuator and Door Mechanism - Inspect for
condition.
* (11) Nose Gear Wheel - Inspect for nicks, cracks, finish abrasions
and corrosion.
* (12) Nose Gear Tire - Check for wear, cuts and proper inflation.
(13) Nose Gear Wheel Bearings - Inspect for corrosion, evidence
of damage, clean and repack.
(14) Nose
Gear Steering
System - Check
turnbuckle
tension and
gimbal
bolts for condition
and torque.
(15) Nose Gear
Steering Stop Block -
Check security.
F. Ice and Rain Protection (Chapter 30).
(1) Pitot Heater
- Check
operation.
G. Navigation and Pitot/Static (Chapter 34).
(1) Pitot
Tube and Lines - Inspect
for security of installation,
cleanliness and evidence of damage. Check sumps for cracks,
leaks
and presence of water,
drain sumps.
H. Lights (Chapter 33).
(1) Nose
Baggage Compartment -
Inspect light and switch
for
security of
installation and
operation.
I. Doors (Chapter 52).
(1) Nose Baggage Door
- Check condition, operation
and security
of hinges, latches and assist cylinder.
*50-Hour
Requirement,
Refer
to
Paragraph
5-22,
B.
Page 2 of 9