Cessna T303 - H. Ignition (Chapter 74).; I. Fuel (Chapter 28).; J. Turbines (Chapter 81).; K. Electrical Power (Chapter 24).

CESSNA MODEL
T303 MAINTENANCE
MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL T303
OPERATION NO. 1
MECH INSP REMARKS
H. Ignition (Chapter 74).
(1)
Spark Plugs - Clean and rotate
(top right to bottom left,
top left
to
bottom
right).
(2) Ignition
Cables - Check condition
and security.
(3) Magnetos - Check magneto to engine timing and security.
I. Fuel
(Chapter
28).
(1) Engine Driven Fuel Pumps - Check for leaks, operation and
security.
J. Turbines (Chapter 81).
(1) Refer to Manufacturer's Overhaul Manual for all inspection
procedures.
K. Electrical Power (Chapter 24).
(1) Alternators - Check belt tension, wires and supports.
L. Vacuum (Chapter 37).
(1) Vacuum System Central Air Filter - Inspect for cleanliness.
(2) Suction Gage
- Inspect for security
and operation.
*50-Hour Requirement,
Refer to Paragraph
5-22, B.
Page
8
of 9