To change from 2WD to 4WD, stop the ATV, and then set the
switch to 4WD . When the ATV is in 4WD, the 4WD
indicator will come on in the dashboard display. To
change from 4WD to 2WD, stop the ATV, be sure the lever
is set to position , and then set the switch to 2WD .
To lock the front gear in 4WD, make sure the on-command
four-wheel-drive switch is set to 4WD , stop the ATV,
move the lever to position , and then set the switch to
LOCK . When the front gear is locked, the front gear lock
indicator ( DIFF.LOCK ) light will come on along with
the indicator in the dashboard display.
To release the front gear lock, stop the ATV and set the switch to 4WD .
a
b
To Next Page