3 Packaging and transport
3.1 Packaging material
The individual system components and modules are shipped in different packaging. Primary packaging
materials: wood, cardboard and plastics (films, foams), but also including hoop iron (for bundles), for
example. Packing materials include materials which are added to the packages for moisture protection
(e.g. silica gel bags).
If no agreement was reached on returning the packaging material then the packaging material remains
with the customer.
Waste disposal that is environmentally friendly and in accordance with the applicable disposal regulations
must be ensured. If necessary, assign waste disposal companies with the disposal of the packaging
material.
The system components are to be transported as far as possible in the package to the installation site
and kept in the package until assembly.
3.2 Shipping labels
Symbols are attached on the packages which must be observed during all transport phases including
storage.
1. TOP! The package must be stored, handled and transported in such a way that the arrows always point
upwards. Rolling, swinging, severe tipping or walking of goods marked in this way must be avoided.
2. Do not use forklift truck here
3. Do not destroy barrier!
4. Fragile, handle with care! Goods marked with this symbol should be handled carefully and should
never be rolled over or tied tightly.
5. Keep dry. Since goods of this type should also be protected from high levels of humidity, they must be
transported in closed vehicles or containers.
6. Center of gravity. This symbol is intended to provide a clear indication of the position of the center of
gravity.
To Next Page
Loading...
Need help?
General
